Positioning Original On Platen Glass - imagistics DL850 Operating Manual

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the EDH, e.g., when
size is incompatible, or when originals are folded, stapled, torn, or in generally poor
condition.
1.
Raise the EDH.
Place original FACE DOWN in the right rear corner, aligning the edge with the right
measuring guide.
2.
Gently close the EDH to prevent the original from shifting on the
glass.
3-6
Reminder!
When selecting Dual Page, Non-Image Area Erase, AUTO mode in
Repeat, or AUTO Layout, DO NOT CLOSE the EDH. For details on each
function, see Section 9.
CAUTION
Do not place too heavy originals, or do not press strongly
when thick original is placed and is under pressure of EDH;
otherwise the glass may be broken and you may be injured.
Positioning Originals (continued)