Copying Using Special Paper (Multi-Sheet Bypass Tray); C Opying Using Special Paper (Multi-Sheet Bypass Tray) - imagistics DL850 Operating Manual

Copying Using Special Paper (Multi-Sheet Bypass Tray)

Use the Multi-sheet bypass tray to copy using special (non-standard) paper. Specify the
paper type and size to be loaded on the Multi-sheet bypass tray, as described below.
1.
Open the Multi-sheet bypass tray, and load the copy paper.
2.
Touch the Bypass key to highlight it.
The TYPE/SIZE key will appear above the Bypass key. APS will be deselected, and
AMS will be highlighted on the Basic Screen.
3.
Touch TYPE/SIZE .
The Paper Type/Size popup menu will be displayed.
4.
Touch the desired paper type key.
When Thick , Thin , Tab paper , OHP , Trace , or User is highlighted, a print job will
conform to the selected paper type.
If no paper type indication is needed, touch the highlighted key to clear the selection
in the TYPE area.
The selection will be reflected on the Basic Screen when restored.
3-30
HINT
When loading special paper in the main body tray or in the LCC to use on a
regular basis, the paper type and size should be specified in the Key
Operator setting. See p. 13-23 to p. 13-24.
HINT
See p. 2-27 for further details.