5.
Select additional copying features, as required.
6.
Enter the desired print quantity from the control panel keypad.
7.
Position originals.
8.
Press [ Start ].
7-16
Output Z-Folded Copies (Z-Folding) (continued)
HINT
See p. 3-7 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
CAUTION
When the finisher exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.