imagistics DL850 Operating Manual page 117

Output Mode for Machine with Finisher (continued)
5.
To set Group mode or output to Secondary (sub) tray:
Touch OUTPUT APPLI. on the Basic Screen to display the Output Mode popup
menu.
Select the desired output mode.
To set the Group mode, touch GROUP to highlight it.
To set the output to Secondary (sub) tray, touch SUB TRAY to display the popup
menu, then touch to highlight the desired key(s).
• Face down non-sort exit: FACE DOWN
• Face down group exit: FACE DOWN and GROUP
• Face up non-sort exit: FACE UP
• Face up group exit: FACE UP and GROUP
Touch OK to restore the Basic Screen. OUTPUT APPLI. will be highlighted, and the
output icon of the selected output mode will be displayed in the output icon area.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 11-3~p. 11-4 to be sure that the finisher capacity is not exceeded.
8.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
HINT
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-49