Repeating Selected Image Area (Repeat: Vert./Horiz. Mode); R Epeating Selected Image Area (Repeat: Vert./Horiz. Mode) - imagistics DL850 Operating Manual

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

Use this function to repeat the selected image area of 10mm ~ 150mm in both vertical
and horizontal widths measured from the rear left corner of the A3 original area
indicated on the left edge of the platen glass.
>>>Vertical/Horizontal Width Setting Mode Specifications<<<
❒ Use the platen glass. (EDH cannot be used.)
❒ Incompatible Conditions: Using EDH, 2a2, 2a1, APS, AMS, Rotation, Group,
Rotation Sort, Rotation Group, Mixed Original, Z-Folded Original, Sheet/Cover
Insertion, Chapter, Combination, Booklet, Transparency Interleave, Image Insert,
Book Copy, Non-Image Area Erase, Frame/Fold Erasure, AUTO Layout, Reduce &
Shift in Image Shift, Stamp/Overlay
1.
Touch APPLI. on the Basic Screen.
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
Vertical/Horizontal Width Setting mode
Horizontal width
Reminder!
Repeat copy
Vertical
width
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Interleave
Image Insert
Book Copy
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
All-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
9-33
Overlay
Memory