Making A Multiple Page Signature Booklet (Booklet); M Aking A Multiple Page Signature Booklet (Booklet); Book Copy - imagistics DL850 Operating Manual

Making a Multiple Page Signature Booklet (Booklet)

Use the Booklet to make a multiple page signature booklet on both sides of paper
from any tray unless it is specified as Thick or Tab paper of the paper type in the Key
Operator mode. Original images are scanned into memory and automatically
arranged in booklet format in correct order.
>>>Specifications for Booklet<<<
❒ Use EDH.
❒ Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2 mode;
otherwise blank pages are automatically inserted to the last.
❒ AMS is automatically selected. Select the desired paper size.
❒ The LCC cannot be selected as tray source if specified as Thick 3.
❒ Incompatible Conditions: APS, 1a1, 2a1, Group, Rotation Sort, Rotation Group,
Face Up, Cover sheet feeder with Cover mode in Booklet, Mixed Original, Tab
Paper, Sheet/Cover Insertion, Combination, Transparency Interleave, Program
Job, Non-Image Area Erase, Repeat, Storing Image in Overlay Memory
1-sided originals
Booklet copying
2-sided originals
1.
Load Copy Paper.
Load the desired copy paper size in a tray.
When selecting cover sheet mode (Cover with Copy sheet or Cover with Blank
sheet), load the same size paper in any other tray unless it is specified as Thick or
Tab paper of the paper type in the Key Operator mode.
2.
Touch APPLI. on the Basic Screen.
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
1 2
48 1
1 3 5
Reminder!
. .. . . . . . . . . .. .
3 4 47
. ... ... .... ...
46 3 26
7 45
.. . . . . . . . . .. . .
Selection Screen
Sheet/Cover
Combination
Transparency
Image Insert
48

Book Copy

Program Job
23
Non-Image
Area Erase
47
Applications
Frame/Fold
Image Shift
9-13
Application
Insertion
Chapter
Booklet
Interleave
Reverse
Image
Repeat
9
Erasure
AUTO
Layout
All-Image
Area
Reduce &
Shift
Stamp
Overlay
Overlay
Memory