imagistics DL850 Operating Manual page 132

Storing Job Conditions (Program Memory: Job Store) (continued)
7.
Touch OK .
The Job Name Registration Screen will be displayed.
8.
Enter a job name.
Enter a job name in up to 16 characters, using the touch screen alphabet keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character entered, then enter the correct job name.
9.
Touch OK .
The Job No. Selection Screen will be restored.
Check that the job name has been correctly entered.
10.
Touch OK to complete the setting and return to the Basic Screen.
4-4
DETAILS
If you wish to cancel the job number selection, touch CANCEL to restore
the Basic Screen, which displays the settings made in step 1 .
If you wish to cancel the settings, press [ Panel Reset ].
DETAILS
If you do not wish to enter a name, simply touch OK . The key displays 16
asterisks (*) in place of a name.
When changing the name of a job previously stored, touch
TER DELETE
repeatedly to delete the previous name, then enter the
new name.
1-CHARAC-