imagistics DL850 Operating Manual page 15

• Output for 9982/9980 Finisher with 9964 Cover Inserter Installed:
Cover Sheet mode
Manual Finishing mode
For details, see Section 7: Advanced Information.
• Overlay
Scans an original image and overlays it on the pages of another document. For
example, you may want to incorporate a page heading, graphic design or logo into the
pages of your document.
• Overlay Memory
Same as for "Overlay" except the overlay image is stored in memory.
• Panel Reset
Automatically resets to auto mode defaults after a specified period of copier inactivity.
• Paper Capacity
Total 2,600 sheets, including two 500-sheet trays, a 1,500 sheet tray, and a 100-sheet
Multi-sheet bypass tray.
Total 6,600 sheets, including 4,000-sheet optional large capacity cassette.
• Platen Memory
Scans documents into memory from the platen glass and/or the document handler
and inserts the pages into another document copied from the document handler. If an
incompatible function is selected in this mode, the latter function will not be selected,
and an Error message will be displayed.
• Program Job
Scans documents into memory while designating different copy conditions for each
original, then prints all the documents collectively.
• Program Memory
Programs up to 30 jobs and recalls each job by job number, as needed. All compatible
platen glass functions can be programmed into Program Memory directly after they
are selected.
• Proof Copy
To ensure correct output before running multiple copies, run a proof copy by pressing
[ Proof Copy ] on the control panel or touching PROOF COPY on the Check Screen.
• Punch Mode for 9982/9980 Finisher with 9976 Punch Kit (9928 Z-Fold & Punch
Unit) Installed:
Punches three holes in output copies.
Features of the DL850 (continued)
xi