[3] User Setting Mode
Set two userset density levels and three USERSETs of magnification.
[1] User Density Level 1 Setting
Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USER1.
The programmed copy density can be recalled by selecting USER1 on the Basic
Screen.
User Setting Mode Menu Screen
Procedure
1 Touch [3] User setting mode on the Key Operator Mode Screen to display the User
Setting Mode Menu Screen.
2 Touch [1] User density level 1 setting to display the User Density Level 1 Setting
Screen.
3 Place the original on the platen glass or in the EDH.
4 Touch Darker or Lighter to select the density level to be programmed.
5 Touch No.1 1~4 , No.2 5~8 , No.3 9~12 , No.4 13~16 , or Set density ## , then press
[ Start ]. The density level sample sheet will be output.
6 Select the desired exposure from the sample sheet(s), then enter the density level No.
by using the touch screen keypad.
7 Touch OK to complete the setting and return to the User Setting Mode Menu Screen.
8 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
9 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-12
User Density Level 1 Setting Screen