Original Form - imagistics DL850 Operating Manual

Copying Non-Standard Size Originals (Original Form) (continued)
3.
Touch the desired size key.
When selecting WHOLE AREA on the Non STD size mode menu, the
copier scans the whole area of the platen glass and copies with the paper
size or magnification ratio currently selected.
4.
Touch OK on the popup menu to complete the setting.
The popup menu will disappear.
5.
Touch OK to complete the setting and return to the Basic Screen.
6.
Load copy paper.
• To load tabbed copy paper in the Multi-sheet bypass tray, specify the
paper type as Tab paper. See p. 3-30 to p. 3-33.
To load tabbed copy paper in any other tray, specify the paper type as
Tab paper in the Key Operator mode. See p. 13-23 to p. 13-24.
• For the procedure of tabbed copy paper supply, see p. 2-28 to p. 2-30.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8.
Position original(s) FACE UP in the EDH, or FACE DOWN on the
platen glass.
• See p. 3-3 to p. 3-6 for details on positioning originals.
• Use EDH store mode (p. 3-34 to p. 3-35) when the original count
exceeds 100.
9.
Press [ Start ].
When the finisher / trimming unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
DETAILS
HINTS
HINT
HINTS
CAUTION
Original
Direction
Text/Photo
Enhance
Mixed
Original
Z-Folded
Original
SDF
Original
Form
8
Special
Original
8-13