Programming Different Settings For An Output Job (Program Job); P Rogramming Different Settings For An Output Job (Program Job) - imagistics DL850 Operating Manual

Programming Different Settings for an Output Job (Program Job)

In the ordinary Store mode, the combined features selected for the job are applied to
all originals to be scanned. In the Program Job mode, you may scan multiple sets of
originals and apply different settings on each set (referred to as JOB), then output
them all as a complete set.
>>>Specifications for Program Job<<<
❒ Max. 100 JOBs can be programmed for an output job.
❒ Once specified, copy size and the paper type/size setting for Multi-sheet bypass
tray cannot be changed for another JOB.
❒ Output mode and print quantity setting cannot be specified for each JOB. The last
setting made will be applied to all JOBs.
❒ Program Job settings cannot be stored in Job Memory.
❒ Incompatible Conditions: APS, Change copy size, Rotation, Group, Rotation Sort,
Rotation Group, Folding, Stapling & Folding, Trimming, Server function, Mixed
Original, Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency
Interleave, Image Insert, Book Copy, 2/4/8 Repeat in Repeat, Overlay, Storing
Image in Overlay Memory
1 2
Original A
1.
Touch APPLI. on the Basic Screen.
9-26
5 6
3 4
1 2
Original B
Reminder!
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
9 10
7 8
5 6
3 4
1 2
Original C
9 10
7 8
5 6
3 4
1 2
5 6
3 4
1 2
1 2
Copied set