Recalling Stored Job Settings (Program Memory: Job Recall) - imagistics DL850 Operating Manual

Recalling Stored Job Settings (Program Memory: Job Recall)

Use Job Recall to recall jobs that are already stored in Program Memory.
1.
Press [ Program Memory ] on the control panel.
The Job No. Selection Screen will be displayed.
2.
Touch to highlight a job number key to select a job you want to
recall.
The screen displays 15 job number keys. If required, scroll to the next page with the
arrow key to reach the desired job number key (16~30).
3.
If desired, touch JOB CHECK .
The Job Recall Check Screen displays to enable you to review the settings.
4.
Touch OK .
The settings of the selected job will be recalled on the restored Basic Screen.
To cancel the recall mode, touch CANCEL to return to the Basic Screen.
5.
Position original(s), then press [ Start ] to print.
4
Program
Memory &
Help Mode
Program
Memory
Help Mode
4-5