Weekly Timer; W Eekly Timer; Select Setting; Tray Auto - imagistics DL850 Operating Manual

[9] Weekly Timer

This function can be accessed only by the Key Operator after a unique 4-digit Weekly
Timer master key code is entered.
The Weekly Timer is a copier management function that shuts down power to the
machine on a daily or hourly basis, and can be programmed specifically for lunch
breaks, weekends and holidays, or any time the copier is not required.
In Addition, Timer Interrupt can be enabled (with or without a password requirement)
to allow temporary use of the machine during periods when power is shut down by the
Timer function.
Conditions required to use the Weekly Timer:
• The power plug is inserted into the socket.
• The power switch is turned on.
• The current date and time are correctly set.
If the Weekly Timer needs to be activated on your machine, contact your service rep-
resentative.
The following Weekly Timer settings can be made.
[1] Weekly timer ON/OFF setting
Enable and disable the Timer function.
[2] Timer Setting
Specify the times that the copier will turn ON and OFF for each day of the week or
the entire week.
[3] Timer action ON/OFF Setting
Specify the working days of the machine by the Timer, for all Mondays through
Sundays, and/or individually for each day of the given month.
[4] Lunch hour off setting
Specify the lunch time interval during which the copier will go off and on.
[5] Timer interrupt password set
Require Password entry for the Timer off function and establish the amount of
usage time.
NOTES:
1 The time is set in terms of the 24 hour clock, where hour [1] is the first
hour after midnight and hour [24] is the hour of midnight. For example, 6
a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
2 The [ Panel Reset ] key is used to change numbers determined by the
SET touch key.
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment

Tray Auto

Select Setting

Energy

Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-27
Key Operator
Mode