Timer Action On/Off Setting - imagistics DL850 Operating Manual

[3] Timer Action On/Off Setting

Use this function to set the On/Off condition of the copier for a given month. Set the
On-Off condition for specific days; or set it collectively, for all Mondays through
Sundays of the given month. The default setting is collective: On for Mondays through
Saturdays, and Off for Sundays.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit Weekly
Timer master key code, then touch OK to display the Weekly Timer Setting Menu Screen.
2 Touch [3] Timer action ON/OFF setting to display the Timer Action On/Off Setting
Screen.
The days of the current month are displayed on the left half of the screen, with timer-
active days highlighted.
3 To activate or deactivate the Timer for any individual day, touch the key for that day to
change its indication.
To change the month, use arrows to scroll to the desired month.
4 To collectively set the on/off data for the entire month by the day of the week, touch the
ON or OFF key for the desired day on the right half of the screen. If you touch an
already-highlighted key, no change will occur.
5 If any change is made in the collective setting area, the Timer Action Change
Confirmation Screen will be displayed.
Touch YES to change the timer action, or touch NO to cancel.
The Timer Action On/Off Setting Screen will be restored.
13-32
NOTE:
If an invalid Weekly Timer master key code is entered, continue by entering
the valid 4-digit code.
[9] Weekly Timer (continued)
Timer Action On/Off Setting Screen
Timer Action Change Confirmation Screen