imagistics DL850 Operating Manual page 374

[13] Memory Switch Setting (continued)
[37] Change page no. pos. (booklet)
Set the machine to position the page numbers automatically on the outside edges of
the copy when using Booklet with Page Numbering in Stamp.
[38] Trimmer (STD/ Non STD size)
Set the machine to allow trimming the folded or stapled & folded sheets in non-
standard size (or wide size).
[39] Timer which prohibits Printer
Set the timer to allow the printing job after operating the copying job.
[40] Bookmark function
Select to set the Bookmark function only for the current job, set for all the following
jobs, or deactivate the function.
[41] Delete of overlay image
In Overlay Memory setting, select to permit or prohibit deleting the selected image
data previously stored in HDD, and also overwriting the data of the same name when
storing new data in HDD.
[42] Orig. direction/binding mode
Select to reset or save the original direction and bind position settings made on the
Special Original popup menu and Output Mode popup menu after completion of each
copying job.
[43] Image stored cont. (SRV)
When storing the image data in HDD in scan/server mode, select to release or
continue the scan/server mode after completion of each image data storing job.
[44] Image recalled cont. (SRV)
When recalling the image data stored in HDD in scan/server mode, select to recall
only one job or to continue recalling jobs.
[45] Exit direction
Select to exit face up or face down when making single-sided copies in non-sort or
sort mode using finisher primary (main) tray.
13-44