imagistics DL850 Operating Manual page 266

Printing Watermark onto Copies (Stamp) (continued)
5.
Touch OK .
The Stamp/Overlay Selection Screen will be restored.
Touch to select another stamp function key to use in combination, if desired.
6.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
7.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
8.
Enter the desired print quantity from the control panel keypad.
9.
Position original(s) FACE UP in the EDH or FACE DOWN on the
platen glass.
10.
Press [ Start ].
9-60
HINT
See p. 3-7 for details on setting print quantity.
HINT
For details on positioning originals, see p. 3-2 to p. 3-6.
CAUTION
When the finisher / trimming unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.