Checking Feature Selections And Proof Copying; C Hecking Feature Selections And Proof Copying; Check Mode; Proof Copy - imagistics DL850 Operating Manual

Checking Feature Selections and Proof Copying

Use the Check mode to confirm copying selections before starting print operation.
In this mode, use Proof copy to produce a sample of the copied set before making
multiple copies. This is a convenient and cost effective way of viewing the results of the
following copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
>>>
Specifications for Check Mode and Proof Copy<<<
❒ Proof copy is available when using EDH, or Platen store mode for multiple originals.
❒ Proof copy cannot be used for testing the Userset density.
❒ Proof copy is unavailable with Group output mode.
1.
Select the desired copy conditions and enter the desired print quantity.
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
2.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
3.
Press [ Mode Check ] on the control panel.
The Check Screen will be displayed.
• Booklet
• Image insert
• Book Copy
• Program job
Reminder!
HINT
Help
Program Memory
Mode Check
Utility

Proof Copy

Start
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job

Check Mode

& Proof Copy
Interrupt
Mode
3-53