imagistics DL850 Operating Manual page 371

4 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
The following functions can be provided by the Memory switch settings.
[1] Panel reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] Panel Reset key function
Set the condition of the following modes when [ Panel Reset ] is pressed: Copy mode,
Copy density, Magnification, Tray selection.
[3] EDH-Original effect
Set the machine condition when original is set on EDH in non-EDH mode with EDH
unit closed.
[4] Program memory auto recall (30)
Program memory No. 30 is automatically recalled when power is turned on or when
Panel Reset is restored.
This job recall function works only when Job No. 30 is registered.
[5] Finisher mode by Full-auto
Set the Finisher mode to be recalled when [ Panel Reset ] is pressed.
[6] Initial by Key counter insert
Set the machine to return to the initial state when Key counter is inserted.
[7] Erasure outside area of original
Set the machine to delete the outside area of original.
[8] EDH frame erasure selection
Set Frame erasure to function anytime in EDH mode.
[9] Automatic tray switching
When paper is depleted during a copying job, the copier continues copying by
switching to another tray that contains the same size paper.
[10] Platen APS
The copier automatically selects the same size copy paper as the original placed on
the platen glass. (In reduction or enlargement mode, an appropriate paper size is
selected according to the ratio selected.)
[13] Memory Switch Setting (continued)
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.C.M.
Lock/Delete
Program
Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Energy
Saver Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Center
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Non-Image
Area Erase
Timing
Adjustment
Centering
Adjustment
13
13-41
Key Operator
Mode