Setting Job During Warm-Up; S Etting Job During Warm-Up - imagistics DL850 Operating Manual

Setting Job During Warm-up

While the copier is warming up after power is turned on, select copy conditions and start
scanning so that the copier may start printing immediately the copier engine is ready.
1.
Turn on the power switch of the machine.
Seven types of Warm-up Screen display in succession for approx. 6 minutes.
2.
Touch the LCD panel to change the Warm-up Screen to the Basic
Screen.
Check that the message "Ready to copy reserve" is displayed on the Basic Screen.
3.
Set the desired copying conditions, and enter the print quantity.
4.
Position original(s) FACE UP in the EDH or FACE DOWN on the
platen glass.
3-8
HINT
See p. 3-7 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.