imagistics DL850 Operating Manual page 256

Reducing Images to Create Binding Margin (Reduce&Shift) (continued)
1.
Select the copy mode and paper size, as required.
2.
Touch APPLI. on the Basic Screen.
3.
Touch Image Shift on the Application Selection Screen.
4.
Touch Reduce & Shift on the Image Shift Setting Screen, then spec-
ify the shift direction and amount.
Touch FRONT or BACK . In Reduce & Shift mode, the BOTH SIDES key appears
dimmed to show inactivity.
Touch to highlight the desired shift direction key, then use the touch screen keypad or
up/down arrow key to enter the desired shift amount, from 0 to 250mm in 1mm
increments.
The image display on the screen allows you to view the shift direction and amount to
be printed on the printed sheets.
9-50
Reminder!
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
DETAILS
The AMS will automatically determine the magnification ratio according to
the shift amount specified for the front page. The shift amount and
magnification ratio determined for the front page will be automatically
applied to the back page. If any positioning adjustment is required, touch
BACK and make direction and amount change.