imagistics DL850 Operating Manual page 131

Storing Job Conditions (Program Memory: Job Store) (continued)
4.
Review the settings on the Job Store Check Screen.
Check that the selections made in step 1 are correctly entered.
If any correction is required, touch CANCEL to return to the Basic Screen.
Make new selections, then restart the Job Store operation from step 2 .
5.
Touch OK .
The Job No. Selection Screen will be restored.
To suspend the storing job after step 6 , press [ Panel Reset ].
Program Memory mode will be cancelled, and the Basic Screen will return
from any screen.
6.
Touch to highlight one of the keys numbered from 1~30 to store the
job under that number.
The screen displays 15 job number keys. The arrow key at the lower left corner can
be used to scroll to the next/previous page.
A blank key indicates that no job is stored under that key, and a named job without a
lock icon ( ) displayed can be overwritten.
The key with a lock icon (
To lock or unlock a job, and to delete a locked job, see p. 13-22.
DETAILS
DETAILS
) displayed is locked and cannot be selected.
HINT
4
Program
Memory &
Help Mode
Program
Memory
Help Mode
4-3