imagistics DL850 Operating Manual page 231

Dividing an Image into Right and Left Pages (Book Copy) (continued)
Scanning Original for Cover
Use platen glass for scanning original for cover.
1 Open the EDH.
2 Position original for front cover FACE DOWN on the platen glass.
3 Press [ Start ] to start scanning.
4 When Front/Back Cover + Full scan is selected, scan original for back
cover according to the above steps 2 and 3.
5 Use platen glass or EDH, as required, for scanning body text originals.
To output the set in the same order as the originals, start scanning from
the first page.
6 Press [ Start ] to start scanning.
7 Repeat steps 5 and 6 for subsequent originals.
"Front cover + Full scan"
"Front/Back cover + Full scan"
"Front cover + Full scan"
"Front/Back cover + Full scan"
NOTES:
• Memory overflow may occur during scanning. See p. 5-11 to p. 5-12.
• When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the EDH throughout the scanning job.
SURVEYOR'S
REPORT Scan from
first page
SURVEYOR'S
SURVEYOR'S
REPORT
REPORT
SURVEYOR'S
REPORT
10
8 9
6 7
4 5
2 3
1
SURVEYOR'S
REPORT
Copies
2 3
Scan from
1
SURVEYOR'S
REPORT
first page
10
8 9
6 7
4 5
2 3
1
SURVEYOR'S
REPORT
Copies
4 5
2 3
1
SURVEYOR'S
REPORT
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Interleave
Image Insert
10
8 9
6 7
4 5
Book Copy
Program Job
Copies
Non-Image
Area Erase
Reverse
Image
Repeat
9
10
Applications
8 9
6 7
Frame/Fold
Erasure
AUTO
Copies Layout
All-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
9-25
Overlay
Memory