imagistics DL850 Operating Manual page 92

Making Double-Sided Copies (1a a a a 2, 2a a a a 2) (continued)
4.
Select additional copy conditions, as desired.
5.
Enter the desired print quantity from the control panel keypad.
6.
Position originals FACE UP in the EDH according to the original
direction specified in step 2 .
7.
Press [ Start ].
The machine starts to scan originals, then prints duplex copies when ready for
output.
Press [ Stop ] to suspend the scanning or printing job.
3-24
DETAILS
Some incompatible conditions may automatically release the selected
copy mode. In this case, arrange the settings so that they are compatible
with the selected copy mode.
HINT
See p. 3-7 for details on setting print quantity.
HINTS
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Use EDH store mode (p. 3-34 to p. 3-35) when the original count
exceeds 100.
CAUTION
When the finisher / trimming unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.