imagistics DL850 Operating Manual page 114

Output Mode for Machine with Finisher (continued)
Secondary (Sub) Tray:
1 Face down non-sort exit outputs simplex copies and odd numbered duplex copies
face down, without offsetting the sorted sets.
2 Face down group exit outputs multiple copies of each original face down, without
offsetting the grouped sets upon exit.
3 Face up non-sort exit outputs simplex copies and odd numbered duplex copies face
up, without offsetting the sorted sets.
4 Face up group exit outputs multiple copies of each original face up, without
offsetting the grouped sets upon exit.
Face down
non-sort
The copier is initially set to output to Primary (main) tray in Sort mode.
Follow the procedure on the next page to change the output mode, as desired.
>>>Specification for Output Modes with Finisher<<<
❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Book Copy,
or Platen store mode is used), Folding, Stapling & Folding, Transparency
Interleave
❒ Incompatible with Staple-sort mode: Using platen glass (unless Image Insert,
Book Copy, or Platen store mode is used), Folding, Stapling & Folding,
Transparency Interleave
3-46
Face down
group
HINT
See Section 7 for the output modes using Finisher options.
Reminder!
Using excessively curled paper or some types of thin paper in Staple-sort
mode may cause poor results in arrangement of the stapled sets.
3
2
1
Example:
Make 3 copied sets
Face up
non-sort
Face up
group