imagistics DL850 Operating Manual page 187

❒ If the primary copier is installed with HDD, the image data stored in HDD can be
output in tandem mode copying.
❒ Corresponding tray sizes on the primary and secondary copiers should be the
same when using multiple trays for a single job.
❒ Incompatible Conditions: Rotation Sort, Rotation Group, Group, Rotation, Trans-
parency Interleave, SET NUMBERING and WATERMARK NUMBERING in Stamp
1.
Turn power on by pressing the Power switches of the two copiers.
Confirm that both copiers are ready to copy with the Basic Screen displayed.
2.
Touch OUTPUT APPLI. on the Basic Screen of either copier.
The Output Mode popup menu will be displayed.
3.
Touch TANDEM to highlight it, then touch OK .
The copier with TANDEM highlighted will become the primary copier; the other copier
will function as the secondary copier. The Master icon displays on the Basic Screen
of the primary copier to indicate that the two units are ready to work in tandem mode.
The Sub icon will display on the Basic Screen of the secondary copier
when [ Start ] is pressed on the primary copier to start the tandem printing
operation.
Using Two Copiers in Tandem (continued)
DETAILS
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Folding /
Stapling&Folding
Punch
Z-Folding
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-27