imagistics DL850 Operating Manual page 115

Output Mode for Machine with Finisher (continued)
❒ Incompatible with Group mode: 1a2 or 2a2 mode using platen glass (unless Platen
store mode is used), Proof Copy, Folding, Stapling & Folding, Sheet/Cover Insertion,
Chapter, Combination, Booklet, Transparency Interleave, Image Insert, Repeat
❒ Incompatible with Group using Secondary (sub) tray: 1a2 or 2a2 mode using platen
glass (unless Platen store mode is used), Proof Copy, Folding, Stapling & Folding,
Punch, Cover sheet feeding, Sheet/Cover Insertion, Chapter, Combination, Booklet,
Transparency Interleave, Image Insert, Repeat
❒ Incompatible with Face Up exit: 1a2 or 2a2 mode using platen glass, Folding,
Stapling & Folding, Punch, Cover sheet feeding
1.
Close the EDH securely, then press [ Panel Reset ].
The Sort mode using Primay (main) tray is initially selected.
Key Operator can change the initial output mode. See p. 13-10.
2.
Select the desired output mode.
To set Non-sort or Sort mode using Primary (main) tray: proceed to the next step.
To set Staple-sort mode using Primary (main) tray: proceed to step 4 .
To set Group mode using Primary (main) tray or output to Secondary (sub) tray:
proceed to step 5 .
3.
To set Non-sort or Sort mode:
Check that SORT is already highlighted on the Basic Screen in initial condition.
To select Non-sort mode, touch SORT to deselect it.
Proceed to step 6 .
4.
To set Staple-sort mode:
(1) Touch STAPLE SORT on the Basic Screen to highlight it.
The staple position icon will be displayed in the output icon area.
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-47