Stapling & Folding
Stapling & Folding
and Trimming
1.
Place a set of paper to be finished into the cover inserter, as
described below for each mode.
• 1 oblique staple / 2 parallel staples: FACE UP
• Stapling & Folding (and Trimming):
FACE UP for the outside of the finished set
Align the guide plate. The indicator light of Start/Stop
button will turn green.
2.
Press Staple Mode Selection button to select the desired mode.
7-24
1 oblique staple
2 parallel staples
HINT
Refer to the specifications for available paper
size and capacity in each mode.
DETAILS
When selecting Stapling & Folding mode, the machine with the 9966
Trimming unit installed will trim the end of booklet automatically.
Using Finisher Manually (continued)
MANUAL OPERATION
Manual finishing operation panel
MAN