Adjusting Position of Copy Image (Image Shift)
Use Image Shift to adjust the position of copy images, e.g. for the purpose of creating
a new binding margin on originals to make it easier for filing purposes.
Page Space function is available only when Booklet or 2 Repeat mode of Repeat has
been already selected. Use this function to make the desired amount of blank space
between the two images on a page. See the illustration on p. 9-48 for details.
If image loss is likely, select the Reduce & Shift mode instead of regular Image shift.
See p. 9-49.
>>>Specifications for Image Shift<<<
❒ Shift amount: 0 to 250mm in 1mm increments
Setting in 0.1mm increments using up/down arrow key is also available by Key
Operator setting. See p. 13-39 to 13-44.
❒ Incompatible Conditions: AUTO Layout, Storing images in Overlay Memory
Original
1.
Select the copy mode and paper size from the Basic Screen, as
required.
2.
Touch APPLI. on the Basic Screen.
9-46
Up
Reminder!
When starting a new copying job, be sure to close the EDH securely, then
press [ Panel Reset ].
Right
Up
Left
Down
Copies
Down
Right
Left