imagistics DL850 Operating Manual page 189

7.
Press [ Start ] on the control panel of the primary copier.
The Sub icon (
indicate that the two copiers will start working in tandem.
The tandem mode will be released automatically when tandem mode copying is
completed, and the Master and Sub icons on each Basic Screen will disappear.
If scanning of the next reserved job is performed during the tandem mode
copying, that job will also be performed in the tandem mode. Up to 10 jobs
including the present job can be reserved.
Interrupt mode during Tandem mode copying
Interrupt copying is available only on the copier with [ Interrupt ] pressed.
The tandem mode copying on the copier in interrupt mode will be
suspended until the interrupt copying is completed.
If the interrupt mode period is of long standing, the Allocation recovery
mode will activate to enable the other copier to handle the remaining print
quantity.
Using Two Copiers in Tandem (continued)
) will display on the Basic Screen of the secondary copier to
DETAILS: Entering reserve job during Tandem mode copying
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Folding /
Stapling&Folding
Punch
Z-Folding
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-29