imagistics DL850 Operating Manual page 230

Dividing an Image into Right and Left Pages (Book Copy) (continued)
7.
Select the desired copy mode and magnification.
8.
Enter the desired print quantity from the control panel keypad.
9.
Position original(s).
When using platen glass to scan, position the first page FACE DOWN with EDH kept
open.
When using EDH, position original(s) FACE UP.
For details on scanning originals in Front cover + Full scan and Front/Back Cover +
Full scan mode, see the description on the following page.
10.
Press [ Start ] to scan.
11.
Repeat steps 9 and 10 for all originals.
12.
Touch STORE to exit the Store mode.
13.
Press [ Start ].
The copier will start printing when ready for output.
9-24
DETAILS
• Available copy size is 8.5"x11".
• When selecting Full scan mode and scanning from the platen glass,
select 1a1 or 1a2 copy mode.
• APS and AMS are released and 1.00 magnification is selected automat-
ically. Change the magnification manually, if desired.
HINT
See p. 3-7 for details on setting print quantity.
Reminder!
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the EDH throughout the scanning job.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.