Loading Tabbed Sheets In Lcc (9933/9932) - imagistics DL850 Operating Manual

Loading Tabbed Sheets in LCC (9933/9932)

Rear
Front
Rear
Front
• The tab extension width should be 12.5mm or less.
• To load the tabbed sheets into LCC, contact your service representative
to position the rear stopper for the paper size to be loaded.
1.
Open the LCC top door.
2.
Press the paper loading button to lower the LCC bottom plate.
3.
Load the tabbed sheets into the LCC as illustrated above.
4.
Close the LCC top door.
Example: 3 Tabbed sheets loaded in position for one finished set.
Section 1
Introduction
Printed
set
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
1st TAB
Section 1
Section 1
Introduction
Printed
Section 1
Introduction
Introduction
set
Reminder!
Loading Paper (continued)
1st TAB
Section 1
Introduction
2nd TAB
3rd TAB
ONE FINISHED SET
2nd TAB
1st TAB
2nd TAB
Section 1 Section 1
Introduction Introduction
3rd TAB
3rd TAB
THREE FINISHED SETS
2
Information
Machine
Configuration
1st TAB
Turn On/Off
2nd TAB
the Power
3rd TAB
Section 1
Introduction
2-29
Machine
Loading
Paper