imagistics DL850 Operating Manual page 100

Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued)
When Wide paper is highlighted, the popup menu will appear.
Use arrow keys to scroll to the desired wide size, then specify the precise dimensions
of paper to be used, following the procedure below.
(1) Touch Input size . The Input Size popup menu will appear.
(2) Touch the vertical size key to highlight it. Use the keypad on the popup menu to
enter the vertical size, or use arrow keys to scroll to that number.
The entered number should fall within the range from the vertical size of the
standard size corresponding to the selected wide size, to a maximum of 314mm.
(3) Similarly, touch the horizontal size key to highlight it, then use the keypad on the
popup menu to enter the horizontal size, or use arrow keys to scroll that number.
The entered number should fall within the range from the horizontal size of the
standard size corresponding to the selected wide size, to a maximum of 459mm.
(4) Touch Select size to return to the Select Size popup menu.
Touch Lead edge or Rear edge to select the image starting position.
6.
Touch OK to return to the Basic Screen.
7.
Select additional copy conditions, as desired.
3-32
HINTS
• See p. 8-12 to p. 8-13 for details on copying non-standard size or tab
paper originals.
• See p. 9-17 to p. 9-18 for details on copying onto OHP films.