imagistics DL850 Operating Manual page 280

Storing/Deleting Image Data in HDD (Image Store/Delete) (continued)
6.
If the job name is correct, touch OK .
The Scanner Setting Screen will be displayed.
7.
Select the desired scanning conditions.
8.
Position original(s) FACE UP in the EDH or FACE DOWN on the
platen glass.
9.
Press [ Start ] to scan original(s).
When scanning originals is completed, the machine automatically begins storing data
in the HDD. If Store mode is used, touch to deselect STORE on the Scanner Setting
Screen after all originals are scanned, then press [ Start ].
When storing job is almost completed, SCANNER→ HDD icon appears in the
message area, then the Basic Screen will be restored automatically.
10-6
DETAILS
If an entered job name has already been used, the popup menu appears to
ask you whether to rewrite the data or to re-enter new name.
Touch YES to rewrite, or NO to create new name.
DETAILS
Print quantity cannot be entered.
Store mode is available. Touch STORE to highlight it to use this function.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.