Using Finisher Manually; U Sing Finisher Manually - imagistics DL850 Operating Manual

Using Finisher Manually

This function is available only with the 9964 Cover Inserter installed on the 9982/9980
Finisher.
To use this convenient function, simply place a set of paper into the cover inserter,
select the desired mode from the Manual Finishing operation panel located on the top
of the Finisher, then press the Start/Stop button.
Available finishing modes according to the optional configuration are described below.
9982 Finisher + 9964 Cover Inserter
• 1 oblique staple
• 2 parallel staples
9980 Finisher + 9964 Cover Inserter
• 1 oblique staple
• 2 parallel staples
• Stapling & Folding (2 staples in the center + Folding)
9980 Finisher + 9964 Cover Inserter + 9966 Trimming Unit
• 1 oblique staple
• 2 parallel staples
• Stapling & Folding and Trimming (2 staples in the center + Folding + Trimming)
>>>Specifications for Manual Staple 1 oblique staple and 2 parallel staples<<<
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"
❒ Paper weight: 16 ~ 24 lb
❒ Staple capacity: 50 sheets max. (20 lb paper)
❒ Output tray: Primary (main) tray
>>>Specifications for Manual Stapling & Folding mode<<<
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R
❒ Paper weight: 16 ~ 24 lb
❒ Staple capacity: 20 sheets max. (20 lb paper)
❒ Output tray: Booklet tray
>>>Specifications for Manual Stapling & Folding and Trimming mode<<<
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R
❒ Paper weight: 16 ~ 24 lb
❒ Staple capacity: 16 sheets max. (20 lb paper)
❒ Output tray: Trimming unit tray
19 sheets max. (20 lb paper with a thick paper cover)
15 sheets max. (20 lb paper with a thick paper cover)
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Folding /
Stapling&Folding
Punch
Z-Folding
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-23