imagistics DL850 Operating Manual page 152

Troubleshooting Tips (continued)
THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN
INSTRUCTION MANUAL
Check with the Key Operator, as Initial Settings may have been changed.
"PLEASE CHECK ORIGINAL"
This message displays when the copier detects a non-standard paper size on the
platen glass.
Select copy size and press [ Start ]. 1.000 magnification will be selected automatically.
If this message continues to display after selecting copy size, select 1.000
magnification, even if it is already indicated, then press [ Start ]. If desired, ask your
service representative to enable the machine to default to 1.000 magnification in this
situation.
SHEET INSERTION RESULT IS NOT AS EXPECTED
Blank insertion: Be sure manuscript originals do not already include blank sheets in
the locations designated for sheet insertion.
Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right
hand side in the finished set, insertion sheets must be designated on the page setting
screen with odd numbers, not even. If required, make an even numbered original page
odd by inserting a blank sheet in front of that page, so that the blank sheet is even and
the insertion sheet is odd.
FINISHER STAPLE RESULT IS NOT AS EXPECTED
The 2 staple position functions only on copy paper that is loaded vertically (crosswise
style).
COPIES SKEW IN THE STAPLED SETS
Check to see if copy paper is excessively curled in the tray.
Reload the copy paper upside down.
USING PUNCH, COPIES CANNOT BE PUNCHED
Check to see if the message "Trash basket of Punch kit is full" is displayed.
Empty the trash basket.
COPIES CANNOT BE STAPLED OR PUNCHED IN POSITION
Check to make sure the side guide plates are securely aligned to the copy paper in the
paper tray to be used.
USING TRIMMER, COPIES CANNOT BE TRIMMED
Check to see if the message "Trash basket of Trimmer is full" is displayed.
Empty the trash basket.
5-16