Output Z-Folded Copies (Z-Folding); O Utput Z-Folded Copies (Z-Folding) - imagistics DL850 Operating Manual

Output Z-Folded Copies (Z-Folding)

The Z-Folding mode is available only when 9928 Z-Fold & Punch unit option is
installed on the 9982/9980 Finisher.
When the Z-Folding mode is selected in combination with any of the Primary (main)
tray output modes, the original image is copied on 11"x17"/8.5"x14" copy paper and
output to the Primary (main) tray of the Finisher according to the selected output mode.
>>>Specifications for Z-Folding Mode<<<
❒ Folding type: Z-folding (11"x17"), double-folding (8.5"x14")
❒ Copy paper size: 11"x17", 8.5"x14" (16 ~ 24 lb paper)
❒ Folded width*: 215 mm or less for 11"x17"
❒ When using Mixed Original mode with Z-Folding mode, 11"x17" and 8.5"x14"
originals should not be mixed, otherwise the Z-Folding mode may not function
properly.
❒ Special paper type (Thick 2, OHP film, labels, tabbed sheets) and non-standard
size (STD size (special), Non STD size, Wide paper) cannot be Z-folded. Using
special paper willl cause the machine trouble.
Some plain paper types may cause folded line to shift in Z-Folding mode.
❒ Incompatible Conditions: Using platen glass (available when platen memory copy
is selected), Staple-sort using 8.5"x14", Output to Secondary (sub) tray, Folding,
Stapling & Folding, Trimming, Tandem mode, Transparency Interleave
❒ When using Z-folding, Staple-sort and APS for mixed size originals, heed the
following limits on capacity:
Number of Z-folded sheets
7-14
All other paper sizes will be output without Z-fold or double-fold.
261.6 mm or less for 8.5"x14"
*The width from the paper edge to the first folded line
Capacity for Mixed Size Originals
using Z-Folding and Staple-Sort with APS
Capacity for one stapled set
Number of regular sheets
1 sheet
2
3
4
5
6 or more Staple-Sort is unavailable with Z-Folding.
Primary Tray Capacity
1 ~ 40 sheets
0 ~ 30
0 ~ 20
0 ~ 10
0
20 stapled sets
10
4
3
2