All Count Reset - imagistics DL850 Operating Manual

[4] E.C.M. (Electronic Copy Monitor) Function Setting (continued)
[2] E.C.M. All Count Reset
Reset the count for all ECM accounts.
ECM Setting Menu Screen
Procedure
1 Touch [4] E.C.M. function setting on the Key Operator Mode Screen. Enter an 8-digit
ECM master key code, then touch OK to display the ECM Setting Menu Screen.
2 Touch [2] E.C.M. all count reset . The ECM All Count Reset Screen will be displayed.
3 Touch YES to reset all counters to zero and to return to the ECM Setting Menu Screen.
Or, touch NO to cancel. Touching PREVIOUS SCREEN will also cancel this function
and return to the ECM Setting Menu Screen.
4 If other ECM setting changes are required, touch desired key, from [1]~[3].
5 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
13-20
NOTE:
If an invalid ECM master key code is entered, continue by entering the
valid 8-digit code.
ECM All Count Reset Screen