imagistics DL850 Operating Manual page 182

8.
Load the cover sheet paper into the optional cover inserter of the
9982/9980 Finisher.
If the paper size loaded in the cover inserter is not
suitable for the selected copy conditions, the following
messages will be displayed and copying will be
unavailable till the correct size is loaded.
Please load cover sheet in
cover inserter
Adapt paper size between
cover sheet and selected paper
9.
Enter the desired print quantity from the control panel keypad.
10.
Position originals.
11.
Press [ Start ].
7-22
HINT
See p. 3-7 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
CAUTION
When the finisher exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
Cover Sheet Feeding (continued)