Turning On The Power Switch; To Turn On The Power - imagistics DL850 Operating Manual

Turning On the Power Switch

To Turn On the Power

1.
Turn ON the power switch.
The power switch is located on the left side of the main body.
If the copier will not be turned on by the power switch, open the left door of
the main body, then check that the internal reset switch of the copier is ON.
(See p. 2-4.)
Be sure not to use the reset switch in usual operation.
2.
The Warm-up Screens will be displayed.
Seven types of Warm-up Screens will be displayed in succession for approx. 6.0 min-
utes.
You can set reserve jobs while the machine is warming up. Touch the LCD
screen to change the Warm-up Screen to the Basic Screen, then check
that the message "Ready to copy reserve" is displayed on the Basic
Screen. See p. 3-8 to p. 3-9.
HINT
HINT
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
2-17