Inserting a New Staple Cartridge into 9982/9980 Finisher (continued)
9980: Remove the empty cartridge from the cartridge housing.
5.
Insert the new cartridge into the housing.
Firmly insert the cartridge into the housing while the arrow indication on the cartridge
appears as shown below.
6.
9982: Remove the lock tape from the cartridge, then close the bottom
of the housing.
12-8
Reminder!
Do not remove the staples remaining inside the housing; otherwise, the
first sheet output after the replenishment will not be stapled.
9982
2
1
9980