imagistics DL850 Operating Manual page 112

Output Mode for Machine without Finisher (continued)
(2) Touch to highlight the desired mode key.
To use Face Up mode in combination, simply touch to highlight FACE UP instead
of FACE DOWN .
(3) Touch OK .
The Basic Screen will be restored, with OUTPUT APPLI. highlighted.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
5.
Position original(s) FACE UP in the EDH or FACE DOWN on the
platen glass.
6.
Press [ Start ].
Press [ Stop ] to suspend the scanning or printing job.
3-44
HINTS
• See p. 11-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
CAUTION
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
DETAILS: Output Icons on the Basic Screen
Face Down
Non-sort Rotation sort
Face Up
Non-sort Rotaion sort
Group Rotation group
Group Rotation group