Adjusting The Print Quality - imagistics ipc1-im8130 Operator's Manual

click any field or control to see context-sensitive help or click
open the online help system.
7 Once the watermark looks acceptable, click
properties tab.
8 Set the following watermark properties:
9 Click
other tabs or click

Adjusting the Print Quality

By adjusting the print quality settings, you can change the brightness
and contrast of printed images, and customize halftoning options. These
settings primarily affect output when printing graphic-intensive
documents.
Note: Some applications, such as Adobe applications, override the
driver settings. You should set the driver print quality settings only if
equivalent settings are not provided through the application.
1 Select the printer driver from the Printers window.
2 Click
3 Click the
PSL3 drivers, and between the different Windows operating systems.
4 Select an option:
120
Enable
Show only on first page
page of the document only. When disabled, the watermark is
printed on every page.
Enable to print the watermark text with a solid fill.
Solid
Enable
Draw as outline
Enable
Transparent only
transparent properties, superimposing the document text over
the watermark text. When this option is disabled, the watermark
image obscures the document text.
to accept the settings and continue making selections from
Apply
OK
.
Properties
tab. The quality options differ between the PCL6 and
Quality
Setting Contrast
Setting Brightness
Adjusting Halftoning
to print the watermark on the first
to print the watermark text without any fill.
to print the watermark text with
to close the Properties window.
on page 121
on page 121
on page 121
to return to the Layout
OK
ipc1-im8130 Operator's Guide
to
Help