Debug Platform Packet Protocol Lacp - Cisco Catalyst 4500 Series Command Reference Manual

debug platform packet protocol lacp

debug platform packet protocol lacp
To debug the LACP protocol packets, use the debug platform packet protocol lacp command. To
disable the debugging output, use the no form of this command.
Syntax Description
receive
transmit
vlan
Defaults This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to enable all PM debugging:
Switch# debug platform packet protocol lacp
Switch#
Related Commands Command
undebug platform packet protocol lacp
(same as no debug platform packet
protocol lacp)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-162
debug platform packet protocol lacp [receive | transmit | vlan]
no debug platform packet protocol lacp [receive | transmit | vlan]
(Optional) Enables the platform packet reception debugging functions.
(Optional) Enables the platform packet transmission debugging functions.
(Optional) Enables the platform packet VLAN debugging functions.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Disables debugging output.
OL-27596 -01