Clear Vlan Counters - Cisco Catalyst 4500 Series Command Reference Manual

clear vlan counters

clear vlan counters
To clear the software-cached counter values to start from zero again for a specified VLAN or all existing
VLANs, use the clear vlan counters command.
Syntax Description vlan-id
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Usage Guidelines
If you do not specify a vlan-id value; the software-cached counter values for all the existing VLANs are
cleared.
Examples
This example shows how to clear the software-cached counter values for a specific VLAN:
Switch# clear vlan 10 counters
Clear "show vlan" counters on this vlan [confirm] y
Switch#
Related Commands Command
show vlan counters
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-130
clear vlan [vlan-id] counters
(Optional) VLAN number; see the "Usage Guidelines" section for valid values.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays VLAN counter information.
OL-27596 -01