Pppoe Intermediate-Agent Format-Type (Interface Vlan-Range) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

pppoe intermediate-agent format-type (interface vlan-range)

This command takes effect only if you enable the pppoe intermediate-agent interface vlan-range
Note
configuration mode command.
To set circuit-id or remote-id for an interface vlan-range, use the
pppoe intermediate-agent format-type interface vlan-range mode command. To unset the parameters,
use the no form of this command.
Syntax Description circuit-id string string
remote-id string string
Defaults No default values for circuit-id and remote-id.
Command Modes Interface vlan-range configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
Use these commands to set circuit-id or remote-id on an interface vlan-range. If the circuit-id is not set,
the system's automatically generated circuit-id is used.
Examples This example shows how to set remote-id on an interface VLAN:
Switch(config-if)# vlan-range 268
Switch(config-if-vlan-range)#
pppoe intermediate-agent format-type remote-id string user5551983-cabletv
This example shows how to unset circuit-id on an interface vlan-range:
Switch(config-if)# vlan-range 167-368
Switch(config-if-vlan-range)# no pppoe intermediate-agent format-type circuit-id
Related Commands Command
pppoe intermediate-agent
(interface vlan-range)
OL-27596 -01
pppoe intermediate-agent format-type {circuit-id | remote-id} string string
no pppoe intermediate-agent format-type {circuit-id | remote-id} string string
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
pppoe intermediate-agent format-type (interface vlan-range)
ASCII string literal value to be set for circuit-id.
ASCII string literal value to be set for remote-id.
Description
Enables PPPoE Intermediate Agent on an interface VLAN range.
2-559