Show Mac-Address-Table Vlan - Cisco Catalyst 4500 Series Command Reference Manual

show mac-address-table vlan

show mac-address-table vlan
To display information about the MAC address table for a specific VLAN, use the show
mac-address-table vlan command.
Syntax Description vlan vlan_id
protocol protocol
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Usage Guidelines
For the MAC address table entries used by the routed ports, the routed port name is displayed in the
"vlan" column not the the internal VLAN number.
The keyword definitions for the protocol variable are as follows:
•
•
•
•
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-842
show mac-address-table [vlan vlan_id] [protocol protocol]
(Optional) Displays the entries for a specific VLAN; valid values are from 1 to
4094.
(Optional) Specifies a protocol. See the "Usage Guidelines" section for more
information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended addressing was added.
assigned specifies the assigned protocol entries.
ip specifies the IP protocol.
ipx specifies the IPX protocols.
other specifies the other protocol entries.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01