Ipv6 Mld Snooping Last-Listener-Query-Count - Cisco Catalyst 4500 Series Command Reference Manual

Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches

ipv6 mld snooping last-listener-query-count

To configure IP version 6 (IPv6) Multicast Listener Discovery Mulitcast Address Specific Queries
(MASQs) that will be sent before aging out a client, use the ipv6 mld snooping
last-listener-query-count command. To reset the query count to the default settings, use the no form of
this command.
Syntax Description
vlan vlan-id
integer_value
Command Default
The default global count is 2.
The default VLAN count is 0 (the global count is used).
Command Modes
Global configuration mode
Command History
Release
12.2(40)SG
Usage Guidelines
In MLD snooping, the IPv6 multicast switch periodically sends out queries to hosts belonging to the
multicast group. If a host wants to leave a multicast group, it can silently leave or it can respond to the
query with a Multicast Listener Done message (equivalent to an IGMP Leave message). When
Immediate Leave is not configured (it should not be configured if multiple clients for a group exist on
the same port), the configured last-listener query count determines the number of MASQs that are sent
before an MLD client is aged out.
When the last-listener query count is set for a VLAN, this count overrides the value configured globally.
When the VLAN count is not configured (set to the default of 0), the global count is used.
VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used
in MLD snooping.
OL-27596 -01
ipv6 mld snooping [vlan vlan-id] last-listener-query-count integer_value
no ipv6 mld snooping [vlan vlan-id] last-listener-query-count
(Optional) Configures last-listener query count on the specified VLAN. The
VLAN ID range is 1 to 1001 and 1006 to 4094.
The integer range is 1 to 7.
Modification
This command was introduced on the Catalyst 4500.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
ipv6 mld snooping last-listener-query-count
2-369

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents