Cisco Catalyst 4500 Series Command Reference Manual page 760

show idprom
Examples This example shows how to display IDPROM information for module 4:
Switch# show idprom module 4
Module 4 Idprom:
Common Block Signature = 0xABAB
Common Block Version = 1
Common Block Length = 144
Common Block Checksum = 4199
Idprom Size = 256
Block Count = 2
FRU Major Type = 0x4201
FRU Minor Type = 303
OEM String = Cisco Systems, Inc.
Product Number = WS-X4306
Serial Number = 00000135
Part Number = <tbd>
Hardware Revision = 0.2
Manufacturing Bits = 0x0000
Engineering Bits = 0x0000
Snmp OID = 0.0.0.0.0.0.0.0
Power Consumption = 0
RMA Failure Code = 0 0 0 0
Linecard Block Signature = 0x4201
Linecard Block Version = 1
Linecard Block Length = 24
Linecard Block Checksum = 658
Feature Bits = 0x0000000000000000
Card Feature Index = 50
MAC Base = 0010.7bab.9830
MAC Count = 6
Switch#
This example shows how to display IDPROM information for the GBICs on the Gigabit Ethernet
interface 1/2:
Switch# show idprom interface gigabitethernet1/2
GBIC Serial EEPROM Contents:
Common Block:
Identifier
Extended Id
Connector
Transceiver
Speed
Media
Technology
Link Length
GE Comp Codes
SONET Comp Codes = Not available [0x0]
Encoding
BR, Nominal
Length(9u) in km
Length(9u)
Length(50u)
Length(62.5u)
Length(Copper)
Vendor name
Vendor OUI
Vendor Part No.
Vendor Part Rev.
Wavelength
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-702
Chapter 2
= GBIC [0x1]
= Not specified/compliant with defined MOD_DEF [0x0]
= SC connector [0x1]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= 8B10B [0x1]
= 1300000000 MHz
= GBIC does not support single mode fibre, or the length
must be determined from the transceiver technology.
= > 25.4 km
= GBIC does not support 50 micron multi-mode fibre, or the
length must be determined from the transceiver technology.
= GBIC does not support 62.5 micron multi-mode fibre, or
the length must be determined from transceiver technology.
= GBIC does not support copper cables, or the length must
be determined from the transceiver technology.
= CISCO-FINISAR
= 36965
= FTR-0119-CSC
= B
= Not available
Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01