Cisco Catalyst 4500 Series Command Reference Manual page 518

match flow ip
Switch(config-if)# service-policy input p1
Switch(config-if)# end
Switch# write memory
Switch# show policy-map interface
FastEthernet6/1
class-map c1
match flow
destination-port
!
policy-map p1
!
interface FastEthernet 6/1
service-policy input p1
Switch# show class-map c1
Class Map match-all c1 (id 2)
Match flow
destination-port
Switch# show policy-map p1
Policy Map p1
Switch# show policy-map interface
FastEthernet6/1
Service-policy input: p1
destination-port
Switch#
Related Commands Command
service-policy (interface configuration)
show class-map
show policy-map
show policy-map interface
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-460
ip source-address ip destination-address ip protocol l4 source-port l4
class c1
police 1000000 bps 9000 byte conform-action transmit exceed-action drop
ip source-address ip destination-address ip protocol l4 source-port l4
Class c1
police 1000000 bps 9000 byte conform-action transmit exceed-action drop
Class-map: c1 (match-all)
15432182 packets
Match: flow ip source-address ip destination-address ip protocol l4 source-port l4
police: Per-interface
Conform: 64995654 bytes Exceed: 2376965424 bytes
Class-map: class-default (match-any)
0 packets
Match: any
0 packets
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Attaches a policy map to an interface.
Displays class map information.
Displays information about the policy map.
Displays the statistics and configurations of the input and
output policies that are attached to an interface.
OL-27596 -01