Macro Auto Execute (Built-In Function) - Cisco Catalyst 4500 Series Command Reference Manual

macro auto execute (built-in function)

macro auto execute (built-in function)
Use the macro auto execute configuration command to change built-in function default values or to map
user-defined triggers to built-in functions and to pass the parameter values. Use the no form of this
command to unmap the trigger.
Syntax Description
event_trigger
shell_function
param name=value
Defaults Auto Smartports is disabled.
Command Modes Global configuration
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-434
macro auto execute event_trigger builtin shell_function [param name=values]
no macro auto execute event_trigger builtin shell_function [param name=values]
Defines mapping from an event trigger to a built-in macro.
Specify an event trigger:
•
•
•
•
•
•
•
•
Specifies a built-in macro name:
•
•
•
•
•
•
•
(Optional) Specifies values for the parameters that are to be used in the
function body.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
CISCO_PHONE_EVENT
CISCO_SWITCH_EVENT
CISCO_ROUTER_EVENT
CISCO_WIRELESS_AP_EVENT
CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT
CISCO_DMP_EVENT
CISCO_IPVSC_EVENT
WORD—Apply a user-defined event trigger.
CISCO_PHONE_AUTO_SMARTPORT
(Optional) Specify the parameter values: $ACCESS_VLAN=(1) and
$VOICE_VLAN=(2).
CISCO_SWITCH_AUTO_SMARTPORT
(Optional) Specify the parameter values: $NATIVE_VLAN=(1).
CISCO_ROUTER_AUTO_SMARTPORT
(Optional) Specify the parameter values: $NATIVE_VLAN=(1).
CISCO_AP_AUTO_SMARTPORT
(Optional) Specify the parameter values: $NATIVE_VLAN=(1).
CISCO_LWAP_AUTO_SMARTPORT
(Optional) Specify the parameter values: $ACCESS_VLAN=(1).
CISCO_DMP_AUTO_SMARTPORT
CISCO_IP_CAMERA_AUTO_SMARTPORT
OL-27596 -01